Home » Latest » DIY House & Home » DIY Giant Shower Makeover

DIY Giant Shower Makeover

1

InfoSearched 55 0 DIY House & Home

SaveSavedRemoved 0

Shower Makeover

I’ll will be ripping out our old bathtub and tiny shower to build one giant shower. Check out the fun Shower makeover transformation.

What type of paint should you use for a shower makeover?

DIY Giant Shower Makeover: A Step-by-Step Guide to Transforming Your Bathroom

If you’re tired of looking at a drab and outdated shower every time you step into the bathroom, it’s time for a DIY makeover. With just a few tools and materials, you can take your shower from bland to beautiful in no time. Best of all, you can save a lot of money in the process.

Read on for a step-by-step guide to transforming your shower.

Step 1: Gather Your Supplies

Before you begin, make sure you have all the necessary tools and materials. You’ll need the following:

– Tile cleaner

– Grout cleaner

– Grout paint

– Painter’s tape

– Sponge

– Bucket of water

– Fine grit sandpaper

– Epoxy paint

– Brush

– Roller

– Paint tray

Step 2: Clean the Tiles

To get started, clean the tiles thoroughly. Use a tile cleaner to remove any dirt and grime that has accumulated over time. Next, use a grout cleaner to clean the grout. You don’t want to paint over any stains or dirt because it will prevent the paint from adhering to the surface.

Step 3: Apply Painter’s Tape

Once the tiles and grout are clean, apply painter’s tape around the edges of the shower, covering any areas you don’t want to paint. This will keep the lines clean and prevent the paint from bleeding onto other surfaces.

Step 4: Sand the Tiles

Using a fine grit sandpaper, lightly sand the tiles to remove any gloss or shine. This will help the paint adhere to the surface better.

Step 5: Paint the Tiles

Now it’s time to paint. Use an epoxy paint that is specifically designed for use in wet areas such as showers. Start in the corners and work your way out, applying the paint with a brush or roller. Be sure to coat every inch of tile so that it is fully covered.

Step 6: Touch Up the Grout

While the paint is still wet, use a small brush to touch up any areas where it has smudged onto the grout. This will ensure that the lines are clean and crisp.

Step 7: Let It Dry

Once you’ve finished painting, let the surface dry overnight. You don’t want to use the shower for at least 24 hours to allow the paint to fully cure.

Step 8: Clean Up

Once the paint is dry, remove the painter’s tape and clean up any stray drips or smudges. You can use a grout paint to brighten up the grout and give it a fresh look.

With these simple steps, your shower will be transformed in no time. Not only will you love the new look, but you’ll save money by doing it yourself. So why not give it a try and see what you can accomplish? You’ll be amazed at the results.