InfoSearched
Published -
- August 10, 2019
- 11:12 pm
How to install an egress basement window.
A DIY home improvement project that not only adds a ton of light, but also substantially increases the value of the home by allowing you to count the space as a bedroom and livable square footage.
Total Cost (not including tools) approx $800
Egress Rated Window = $150
Wellcraft Egress Well = $120 each (x2) = $240
Professional Concrete Cutting = $350
Fasteners, Caulk, Flashing, Trim, Wood = $60
Can egress basement windows be installed without professional assistance?
Egress Basement Window Installation | How To | DIY Home Improvement
If you are looking to convert your basement into a livable space, you should consider installing egress basement windows. These windows not only provide natural light and ventilation, but also serve as an emergency exit in case of fire or other emergencies. Installing egress windows may seem daunting, but with the right tools and techniques, it can be a great DIY home improvement project.
Here are the steps to follow for installing egress basement windows:
Step 1: Choose the right location
The first step in installing egress windows is to choose the right location. It’s important to ensure that the window location complies with local building codes and is accessible from the basement living space. You should also check the water table in your area to ensure that the window won’t be subjected to water damage.
Step 2: Measure and mark the opening
Using a measuring tape and level, mark the opening where you’ll install the window. Ensure that it’s the correct size and shape for the window you are installing. You can make the opening by cutting through the concrete foundation with a concrete saw or jackhammer.
Step 3: Install the window well
After cutting through the foundation, you need to install a window well. A window well is a small retaining wall that surrounds the window opening and prevents soil from collapsing into the space. You can either use a pre-fabricated window well or build one from scratch using masonry blocks.
Step 4: Install the window
After installing the window well, it’s time to install the egress window. Carefully position the window into the opening and secure it with screws. Make sure that it’s level and plumb before tightening the screws.
Step 5: Finish the installation
Once the window is installed, you need to finish the installation. This involves sealing any gaps between the window and the window well or foundation with silicone caulking. You can also add a cover to the window well to prevent debris from clogging the drain and to enhance the aesthetic appeal of the window well.
In conclusion, installing egress basement windows is a great way to improve the functionality and safety of your basement. With the right tools and techniques, it can be a manageable DIY home improvement project. Always be sure to follow local building codes and consult with a professional if you are uncertain about any aspect of the installation.
